my $alpha_asm="alphacpuid.o:bn_asm.o alpha-mont.o:::::sha1-alpha.o:::::::ghash-alpha.o:void";
my $mips32_asm=":bn-mips.o::aes_cbc.o aes-mips.o:::sha1-mips.o sha256-mips.o:::::::";
my $mips64_asm=":bn-mips.o mips-mont.o::aes_cbc.o aes-mips.o:::sha1-mips.o sha256-mips.o sha512-mips.o:::::::";
-my $s390x_asm="s390xcap.o s390xcpuid.o:bn-s390x.o s390x-mont.o::aes_ctr.o aes-s390x.o:::sha1-s390x.o sha256-s390x.o sha512-s390x.o::rc4-s390x.o:::::ghash-s390x.o";
+my $s390x_asm="s390xcap.o s390xcpuid.o:bn-s390x.o s390x-mont.o s390x-gf2m.o::aes_ctr.o aes-s390x.o:::sha1-s390x.o sha256-s390x.o sha512-s390x.o::rc4-s390x.o:::::ghash-s390x.o";
my $armv4_asm=":bn_asm.o armv4-mont.o armv4-gf2m.o::aes_cbc.o aes-armv4.o:::sha1-armv4-large.o sha256-armv4.o sha512-armv4.o:::::::ghash-armv4.o:void";
my $parisc11_asm="pariscid.o:bn_asm.o parisc-mont.o::aes_core.o aes_cbc.o aes-parisc.o:::sha1-parisc.o sha256-parisc.o sha512-parisc.o::rc4-parisc.o:::::ghash-parisc.o:32";
my $parisc20_asm="pariscid.o:pa-risc2W.o parisc-mont.o::aes_core.o aes_cbc.o aes-parisc.o:::sha1-parisc.o sha256-parisc.o sha512-parisc.o::rc4-parisc.o:::::ghash-parisc.o:64";
# ldconfig and run-time linker to autodiscover. Unfortunately it
# doesn't work just yet, because of couple of bugs in glibc
# sysdep/s390/dl-procinfo.c affecting ldconfig and ld.so.1...
-"linux32-s390x", "gcc:-m31 -Wa,-mzarch -DB_ENDIAN -DTERMIO -O3 -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL:s390xcap.o s390xcpuid.o:bn_asm.o s390x-mont.o::aes_ctr.o aes-s390x.o:::sha1-s390x.o sha256-s390x.o sha512-s390x.o::rc4-s390x.o:::::ghash-s390x.o:31:dlfcn:linux-shared:-fPIC:-m31:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/highgprs",
+"linux32-s390x", "gcc:-m31 -Wa,-mzarch -DB_ENDIAN -DTERMIO -O3 -Wall::-D_REENTRANT::-ldl:BN_LLONG RC4_CHAR RC4_CHUNK DES_INT DES_UNROLL:s390xcap.o s390xcpuid.o:bn_asm.o s390x-mont.o s390x-gf2m.o::aes_ctr.o aes-s390x.o:::sha1-s390x.o sha256-s390x.o sha512-s390x.o::rc4-s390x.o:::::ghash-s390x.o:31:dlfcn:linux-shared:-fPIC:-m31:.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR):::/highgprs",
#### SPARC Linux setups
# Ray Miller <ray.miller@computing-services.oxford.ac.uk> has patiently
# assisted with debugging of following two configs.
# February 2011.
#
-# Add AES_xts_[en|de]crypt. This includes support for z196
-# km-xts-aes instructions, which deliver ~70% improvement at 8KB
-# block size over vanilla km-based code.
+# Add AES_xts_[en|de]crypt. This includes support for z196 km-xts-aes
+# instructions, which deliver ~70% improvement at 8KB block size over
+# vanilla km-based code, 37% - at most like 512-bytes block size.
$flavour = shift;
########################################################################
# void AES_xts_encrypt(const char *inp,char *out,size_t len,
-# const AES_KEY *key1, const AES_KEY *key2,u64 secno);
+# const AES_KEY *key1, const AES_KEY *key2,
+# const unsigned char iv[16]);
#
{
my $inp="%r2";
.align 16
_s390x_xts_km:
___
-$code.=<<___ if(0);
+$code.=<<___ if(1);
llgfr $s0,%r0 # put aside the function code
lghi $s1,0x7f
nr $s1,%r0
sllg $len,$len,4 # $len&=~15
slgr $out,$inp
- lrvg $s0,$stdframe($sp) # load secno
- lghi $s1,0
+ # generate the tweak value
+ l${g} $s3,$stdframe($sp) # pointer to iv
la $s2,$tweak($sp)
+ lmg $s0,$s1,0($s3)
lghi $s3,16
stmg $s0,$s1,0($s2)
la %r1,0($key2) # $key2 is not needed anymore
slgr $out,$inp
# generate the tweak value
- lrvg $s0,$stdframe($sp) # load secno
- lghi $s1,0
+ l${g} $s3,$stdframe($sp) # pointer to iv
la $s2,$tweak($sp)
+ lmg $s0,$s1,0($s3)
lghi $s3,16
- stg $s0,0($s2)
- stg $s1,8($s2)
+ stmg $s0,$s1,0($s2)
la %r1,0($key2) # $key2 is not needed past this point
.long 0xb92e00aa # km $s2,$s2, generate the tweak
brc 1,.-4 # can this happen?
--- /dev/null
+#!/usr/bin/env perl
+#
+# ====================================================================
+# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+#
+# May 2011
+#
+# The module implements bn_GF2m_mul_2x2 polynomial multiplication used
+# in bn_gf2m.c. It's kind of low-hanging mechanical port from C for
+# the time being... gcc 4.3 appeared to generate poor code, therefore
+# the effort. The module delivers 55%-90% improvement on haviest ECDSA
+# verify and ECDH benchmarks for 163- and 571-bit keys on z990, and
+# 25%-30% - on z196(*). This is for 64-bit build. In 32-bit "highgprs"
+# case improvement is even higher, for example on z990 it was measured
+# 80%-150%. ECDSA sign is modest 9%-12% faster. Keep in mind that
+# these coefficients are not ones for bn_GF2m_mul_2x2 itself, as not
+# all CPU time is burnt in it...
+#
+# (*) Though no improvement could be measured if compared to code
+# generated by gcc 4.1. Keep in mind that z196 is out-of-order
+# execution core and is better at executing poor code.
+
+$flavour = shift;
+
+if ($flavour =~ /3[12]/) {
+ $SIZE_T=4;
+ $g="";
+} else {
+ $SIZE_T=8;
+ $g="g";
+}
+
+while (($output=shift) && ($output!~/^\w[\w\-]*\.\w+$/)) {}
+open STDOUT,">$output";
+
+$stdframe=16*$SIZE_T+4*8;
+
+$rp="%r2";
+$a1="%r3";
+$a0="%r4";
+$b1="%r5";
+$b0="%r6";
+
+$ra="%r14";
+$sp="%r15";
+
+@T=("%r0","%r1");
+@i=("%r12","%r13");
+
+($a1,$a2,$a4,$a8,$a12,$a48)=map("%r$_",(6..11));
+($lo,$hi,$b)=map("%r$_",(3..5)); $a=$lo; $mask=$a8;
+
+$code.=<<___;
+.text
+
+.type _mul_1x1,\@function
+.align 16
+_mul_1x1:
+ lgr $a1,$a
+ sllg $a2,$a,1
+ sllg $a4,$a,2
+ sllg $a8,$a,3
+
+ srag $lo,$a1,63 # broadcast 63rd bit
+ nihh $a1,0x1fff
+ srag @i[0],$a2,63 # broadcast 62nd bit
+ nihh $a2,0x3fff
+ srag @i[1],$a4,63 # broadcast 61st bit
+ nihh $a4,0x7fff
+ ngr $lo,$b
+ ngr @i[0],$b
+ ngr @i[1],$b
+
+ lghi @T[0],0
+ lgr $a12,$a1
+ stg @T[0],`$stdframe+0*8`($sp) # tab[0]=0
+ xgr $a12,$a2
+ stg $a1,`$stdframe+1*8`($sp) # tab[1]=a1
+ lgr $a48,$a4
+ stg $a2,`$stdframe+2*8`($sp) # tab[2]=a2
+ xgr $a48,$a8
+ stg $a12,`$stdframe+3*8`($sp) # tab[3]=a1^a2
+ xgr $a1,$a4
+
+ stg $a4,`$stdframe+4*8`($sp) # tab[4]=a4
+ xgr $a2,$a4
+ stg $a1,`$stdframe+5*8`($sp) # tab[5]=a1^a4
+ xgr $a12,$a4
+ stg $a2,`$stdframe+6*8`($sp) # tab[6]=a2^a4
+ xgr $a1,$a48
+ stg $a12,`$stdframe+7*8`($sp) # tab[7]=a1^a2^a4
+ xgr $a2,$a48
+
+ stg $a8,`$stdframe+8*8`($sp) # tab[8]=a8
+ xgr $a12,$a48
+ stg $a1,`$stdframe+9*8`($sp) # tab[9]=a1^a8
+ xgr $a1,$a4
+ stg $a2,`$stdframe+10*8`($sp) # tab[10]=a2^a8
+ xgr $a2,$a4
+ stg $a12,`$stdframe+11*8`($sp) # tab[11]=a1^a2^a8
+
+ xgr $a12,$a4
+ stg $a48,`$stdframe+12*8`($sp) # tab[12]=a4^a8
+ srlg $hi,$lo,1
+ stg $a1,`$stdframe+13*8`($sp) # tab[13]=a1^a4^a8
+ sllg $lo,$lo,63
+ stg $a2,`$stdframe+14*8`($sp) # tab[14]=a2^a4^a8
+ srlg @T[0],@i[0],2
+ stg $a12,`$stdframe+15*8`($sp) # tab[15]=a1^a2^a4^a8
+
+ lghi $mask,`0xf<<3`
+ sllg $a1,@i[0],62
+ sllg @i[0],$b,3
+ srlg @T[1],@i[1],3
+ ngr @i[0],$mask
+ sllg $a2,@i[1],61
+ srlg @i[1],$b,4-3
+ xgr $hi,@T[0]
+ ngr @i[1],$mask
+ xgr $lo,$a1
+ xgr $hi,@T[1]
+ xgr $lo,$a2
+
+ xg $lo,$stdframe(@i[0],$sp)
+ srlg @i[0],$b,8-3
+ ngr @i[0],$mask
+___
+for($n=1;$n<14;$n++) {
+$code.=<<___;
+ lg @T[1],$stdframe(@i[1],$sp)
+ srlg @i[1],$b,`($n+2)*4`-3
+ sllg @T[0],@T[1],`$n*4`
+ ngr @i[1],$mask
+ srlg @T[1],@T[1],`64-$n*4`
+ xgr $lo,@T[0]
+ xgr $hi,@T[1]
+___
+ push(@i,shift(@i)); push(@T,shift(@T));
+}
+$code.=<<___;
+ lg @T[1],$stdframe(@i[1],$sp)
+ sllg @T[0],@T[1],`$n*4`
+ srlg @T[1],@T[1],`64-$n*4`
+ xgr $lo,@T[0]
+ xgr $hi,@T[1]
+
+ lg @T[0],$stdframe(@i[0],$sp)
+ sllg @T[1],@T[0],`($n+1)*4`
+ srlg @T[0],@T[0],`64-($n+1)*4`
+ xgr $lo,@T[1]
+ xgr $hi,@T[0]
+
+ br $ra
+.size _mul_1x1,.-_mul_1x1
+
+.globl bn_GF2m_mul_2x2
+.type bn_GF2m_mul_2x2,\@function
+.align 16
+bn_GF2m_mul_2x2:
+ stm${g} %r3,%r15,3*$SIZE_T($sp)
+
+ lghi %r1,-$stdframe-128
+ la %r0,0($sp)
+ la $sp,0(%r1,$sp) # alloca
+ st${g} %r0,0($sp) # back chain
+___
+if ($SIZE_T==8) {
+my @r=map("%r$_",(6..9));
+$code.=<<___;
+ bras $ra,_mul_1x1 # a1·b1
+ stmg $lo,$hi,16($rp)
+
+ lg $a,`$stdframe+128+4*$SIZE_T`($sp)
+ lg $b,`$stdframe+128+6*$SIZE_T`($sp)
+ bras $ra,_mul_1x1 # a0·b0
+ stmg $lo,$hi,0($rp)
+
+ lg $a,`$stdframe+128+3*$SIZE_T`($sp)
+ lg $b,`$stdframe+128+5*$SIZE_T`($sp)
+ xg $a,`$stdframe+128+4*$SIZE_T`($sp)
+ xg $b,`$stdframe+128+6*$SIZE_T`($sp)
+ bras $ra,_mul_1x1 # (a0+a1)·(b0+b1)
+ lmg @r[0],@r[3],0($rp)
+
+ xgr $lo,$hi
+ xgr $hi,@r[1]
+ xgr $lo,@r[0]
+ xgr $hi,@r[2]
+ xgr $lo,@r[3]
+ xgr $hi,@r[3]
+ xgr $lo,$hi
+ stg $hi,16($rp)
+ stg $lo,8($rp)
+___
+} else {
+$code.=<<___;
+ sllg %r3,%r3,32
+ sllg %r5,%r5,32
+ or %r3,%r4
+ or %r5,%r6
+ bras $ra,_mul_1x1
+ rllg $lo,$lo,32
+ rllg $hi,$hi,32
+ stmg $lo,$hi,0($rp)
+___
+}
+$code.=<<___;
+ lm${g} %r6,%r15,`$stdframe+128+6*$SIZE_T`($sp)
+ br $ra
+.size bn_GF2m_mul_2x2,.-bn_GF2m_mul_2x2
+.string "GF(2^m) Multiplication for s390x, CRYPTOGAMS by <appro\@openssl.org>"
+___
+
+$code =~ s/\`([^\`]*)\`/eval($1)/gem;
+print $code;
+close STDOUT;
projects / openssl.git / commitdiff