2f923a5e65fb6566b676ca5fdcec98fc04170f39
[openssl.git] / ssl / ssl_locl.h
1 /* ssl/ssl_locl.h */
2 /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
3  * All rights reserved.
4  *
5  * This package is an SSL implementation written
6  * by Eric Young (eay@cryptsoft.com).
7  * The implementation was written so as to conform with Netscapes SSL.
8  * 
9  * This library is free for commercial and non-commercial use as long as
10  * the following conditions are aheared to.  The following conditions
11  * apply to all code found in this distribution, be it the RC4, RSA,
12  * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
13  * included with this distribution is covered by the same copyright terms
14  * except that the holder is Tim Hudson (tjh@cryptsoft.com).
15  * 
16  * Copyright remains Eric Young's, and as such any Copyright notices in
17  * the code are not to be removed.
18  * If this package is used in a product, Eric Young should be given attribution
19  * as the author of the parts of the library used.
20  * This can be in the form of a textual message at program startup or
21  * in documentation (online or textual) provided with the package.
22  * 
23  * Redistribution and use in source and binary forms, with or without
24  * modification, are permitted provided that the following conditions
25  * are met:
26  * 1. Redistributions of source code must retain the copyright
27  *    notice, this list of conditions and the following disclaimer.
28  * 2. Redistributions in binary form must reproduce the above copyright
29  *    notice, this list of conditions and the following disclaimer in the
30  *    documentation and/or other materials provided with the distribution.
31  * 3. All advertising materials mentioning features or use of this software
32  *    must display the following acknowledgement:
33  *    "This product includes cryptographic software written by
34  *     Eric Young (eay@cryptsoft.com)"
35  *    The word 'cryptographic' can be left out if the rouines from the library
36  *    being used are not cryptographic related :-).
37  * 4. If you include any Windows specific code (or a derivative thereof) from 
38  *    the apps directory (application code) you must include an acknowledgement:
39  *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
40  * 
41  * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
42  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
43  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
44  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
45  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
46  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
47  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
48  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
49  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
50  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
51  * SUCH DAMAGE.
52  * 
53  * The licence and distribution terms for any publically available version or
54  * derivative of this code cannot be changed.  i.e. this code cannot simply be
55  * copied and put under another distribution licence
56  * [including the GNU Public Licence.]
57  */
58 /* ====================================================================
59  * Copyright (c) 1998-2001 The OpenSSL Project.  All rights reserved.
60  *
61  * Redistribution and use in source and binary forms, with or without
62  * modification, are permitted provided that the following conditions
63  * are met:
64  *
65  * 1. Redistributions of source code must retain the above copyright
66  *    notice, this list of conditions and the following disclaimer. 
67  *
68  * 2. Redistributions in binary form must reproduce the above copyright
69  *    notice, this list of conditions and the following disclaimer in
70  *    the documentation and/or other materials provided with the
71  *    distribution.
72  *
73  * 3. All advertising materials mentioning features or use of this
74  *    software must display the following acknowledgment:
75  *    "This product includes software developed by the OpenSSL Project
76  *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
77  *
78  * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
79  *    endorse or promote products derived from this software without
80  *    prior written permission. For written permission, please contact
81  *    openssl-core@openssl.org.
82  *
83  * 5. Products derived from this software may not be called "OpenSSL"
84  *    nor may "OpenSSL" appear in their names without prior written
85  *    permission of the OpenSSL Project.
86  *
87  * 6. Redistributions of any form whatsoever must retain the following
88  *    acknowledgment:
89  *    "This product includes software developed by the OpenSSL Project
90  *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
91  *
92  * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
93  * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
94  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
95  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
96  * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
97  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
98  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
99  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
100  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
101  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
102  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
103  * OF THE POSSIBILITY OF SUCH DAMAGE.
104  * ====================================================================
105  *
106  * This product includes cryptographic software written by Eric Young
107  * (eay@cryptsoft.com).  This product includes software written by Tim
108  * Hudson (tjh@cryptsoft.com).
109  *
110  */
111 /* ====================================================================
112  * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
113  * ECC cipher suite support in OpenSSL originally developed by 
114  * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project.
115  */
116
117 #ifndef HEADER_SSL_LOCL_H
118 #define HEADER_SSL_LOCL_H
119 #include <stdlib.h>
120 #include <time.h>
121 #include <string.h>
122 #include <errno.h>
123
124 #include "e_os.h"
125
126 #include <openssl/buffer.h>
127 #ifndef OPENSSL_NO_COMP
128 #include <openssl/comp.h>
129 #endif
130 #include <openssl/bio.h>
131 #include <openssl/stack.h>
132 #ifndef OPENSSL_NO_RSA
133 #include <openssl/rsa.h>
134 #endif
135 #ifndef OPENSSL_NO_DSA
136 #include <openssl/dsa.h>
137 #endif
138 #include <openssl/err.h>
139 #include <openssl/ssl.h>
140 #include <openssl/symhacks.h>
141
142 #ifdef OPENSSL_BUILD_SHLIBSSL
143 # undef OPENSSL_EXTERN
144 # define OPENSSL_EXTERN OPENSSL_EXPORT
145 #endif
146
147 #define PKCS1_CHECK
148
149 #define c2l(c,l)        (l = ((unsigned long)(*((c)++)))     , \
150                          l|=(((unsigned long)(*((c)++)))<< 8), \
151                          l|=(((unsigned long)(*((c)++)))<<16), \
152                          l|=(((unsigned long)(*((c)++)))<<24))
153
154 /* NOTE - c is not incremented as per c2l */
155 #define c2ln(c,l1,l2,n) { \
156                         c+=n; \
157                         l1=l2=0; \
158                         switch (n) { \
159                         case 8: l2 =((unsigned long)(*(--(c))))<<24; \
160                         case 7: l2|=((unsigned long)(*(--(c))))<<16; \
161                         case 6: l2|=((unsigned long)(*(--(c))))<< 8; \
162                         case 5: l2|=((unsigned long)(*(--(c))));     \
163                         case 4: l1 =((unsigned long)(*(--(c))))<<24; \
164                         case 3: l1|=((unsigned long)(*(--(c))))<<16; \
165                         case 2: l1|=((unsigned long)(*(--(c))))<< 8; \
166                         case 1: l1|=((unsigned long)(*(--(c))));     \
167                                 } \
168                         }
169
170 #define l2c(l,c)        (*((c)++)=(unsigned char)(((l)    )&0xff), \
171                          *((c)++)=(unsigned char)(((l)>> 8)&0xff), \
172                          *((c)++)=(unsigned char)(((l)>>16)&0xff), \
173                          *((c)++)=(unsigned char)(((l)>>24)&0xff))
174
175 #define n2l(c,l)        (l =((unsigned long)(*((c)++)))<<24, \
176                          l|=((unsigned long)(*((c)++)))<<16, \
177                          l|=((unsigned long)(*((c)++)))<< 8, \
178                          l|=((unsigned long)(*((c)++))))
179
180 #define l2n(l,c)        (*((c)++)=(unsigned char)(((l)>>24)&0xff), \
181                          *((c)++)=(unsigned char)(((l)>>16)&0xff), \
182                          *((c)++)=(unsigned char)(((l)>> 8)&0xff), \
183                          *((c)++)=(unsigned char)(((l)    )&0xff))
184
185 #define l2n6(l,c)       (*((c)++)=(unsigned char)(((l)>>40)&0xff), \
186                          *((c)++)=(unsigned char)(((l)>>32)&0xff), \
187                          *((c)++)=(unsigned char)(((l)>>24)&0xff), \
188                          *((c)++)=(unsigned char)(((l)>>16)&0xff), \
189                          *((c)++)=(unsigned char)(((l)>> 8)&0xff), \
190                          *((c)++)=(unsigned char)(((l)    )&0xff))
191
192 #define l2n8(l,c)       (*((c)++)=(unsigned char)(((l)>>56)&0xff), \
193                          *((c)++)=(unsigned char)(((l)>>48)&0xff), \
194                          *((c)++)=(unsigned char)(((l)>>40)&0xff), \
195                          *((c)++)=(unsigned char)(((l)>>32)&0xff), \
196                          *((c)++)=(unsigned char)(((l)>>24)&0xff), \
197                          *((c)++)=(unsigned char)(((l)>>16)&0xff), \
198                          *((c)++)=(unsigned char)(((l)>> 8)&0xff), \
199                          *((c)++)=(unsigned char)(((l)    )&0xff))
200
201 #define n2l6(c,l)       (l =((BN_ULLONG)(*((c)++)))<<40, \
202                          l|=((BN_ULLONG)(*((c)++)))<<32, \
203                          l|=((BN_ULLONG)(*((c)++)))<<24, \
204                          l|=((BN_ULLONG)(*((c)++)))<<16, \
205                          l|=((BN_ULLONG)(*((c)++)))<< 8, \
206                          l|=((BN_ULLONG)(*((c)++))))
207
208 /* NOTE - c is not incremented as per l2c */
209 #define l2cn(l1,l2,c,n) { \
210                         c+=n; \
211                         switch (n) { \
212                         case 8: *(--(c))=(unsigned char)(((l2)>>24)&0xff); \
213                         case 7: *(--(c))=(unsigned char)(((l2)>>16)&0xff); \
214                         case 6: *(--(c))=(unsigned char)(((l2)>> 8)&0xff); \
215                         case 5: *(--(c))=(unsigned char)(((l2)    )&0xff); \
216                         case 4: *(--(c))=(unsigned char)(((l1)>>24)&0xff); \
217                         case 3: *(--(c))=(unsigned char)(((l1)>>16)&0xff); \
218                         case 2: *(--(c))=(unsigned char)(((l1)>> 8)&0xff); \
219                         case 1: *(--(c))=(unsigned char)(((l1)    )&0xff); \
220                                 } \
221                         }
222
223 #define n2s(c,s)        ((s=(((unsigned int)(c[0]))<< 8)| \
224                             (((unsigned int)(c[1]))    )),c+=2)
225 #define s2n(s,c)        ((c[0]=(unsigned char)(((s)>> 8)&0xff), \
226                           c[1]=(unsigned char)(((s)    )&0xff)),c+=2)
227
228 #define n2l3(c,l)       ((l =(((unsigned long)(c[0]))<<16)| \
229                              (((unsigned long)(c[1]))<< 8)| \
230                              (((unsigned long)(c[2]))    )),c+=3)
231
232 #define l2n3(l,c)       ((c[0]=(unsigned char)(((l)>>16)&0xff), \
233                           c[1]=(unsigned char)(((l)>> 8)&0xff), \
234                           c[2]=(unsigned char)(((l)    )&0xff)),c+=3)
235
236 /* LOCAL STUFF */
237
238 #define SSL_DECRYPT     0
239 #define SSL_ENCRYPT     1
240
241 #define TWO_BYTE_BIT    0x80
242 #define SEC_ESC_BIT     0x40
243 #define TWO_BYTE_MASK   0x7fff
244 #define THREE_BYTE_MASK 0x3fff
245
246 #define INC32(a)        ((a)=((a)+1)&0xffffffffL)
247 #define DEC32(a)        ((a)=((a)-1)&0xffffffffL)
248 #define MAX_MAC_SIZE    20 /* up from 16 for SSLv3 */
249
250 /*
251  * Define the Bitmasks for SSL_CIPHER.algorithms.
252  * This bits are used packed as dense as possible. If new methods/ciphers
253  * etc will be added, the bits a likely to change, so this information
254  * is for internal library use only, even though SSL_CIPHER.algorithms
255  * can be publicly accessed.
256  * Use the according functions for cipher management instead.
257  *
258  * The bit mask handling in the selection and sorting scheme in
259  * ssl_create_cipher_list() has only limited capabilities, reflecting
260  * that the different entities within are mutually exclusive:
261  * ONLY ONE BIT PER MASK CAN BE SET AT A TIME.
262  */
263 #define SSL_MKEY_MASK           0x000000FFL
264 #define SSL_kRSA                0x00000001L /* RSA key exchange */
265 #define SSL_kDHr                0x00000002L /* DH cert RSA CA cert */
266 #define SSL_kDHd                0x00000004L /* DH cert DSA CA cert */
267 #define SSL_kFZA                0x00000008L
268 #define SSL_kEDH                0x00000010L /* tmp DH key no DH cert */
269 #define SSL_kKRB5               0x00000020L /* Kerberos5 key exchange */
270 #define SSL_kECDH               0x00000040L /* ECDH w/ long-term keys */
271 #define SSL_kECDHE              0x00000080L /* ephemeral ECDH */
272 #define SSL_EDH                 (SSL_kEDH|(SSL_AUTH_MASK^SSL_aNULL))
273
274 #define SSL_AUTH_MASK           0x00007F00L
275 #define SSL_aRSA                0x00000100L /* Authenticate with RSA */
276 #define SSL_aDSS                0x00000200L /* Authenticate with DSS */
277 #define SSL_DSS                 SSL_aDSS
278 #define SSL_aFZA                0x00000400L
279 #define SSL_aNULL               0x00000800L /* no Authenticate, ADH */
280 #define SSL_aDH                 0x00001000L /* no Authenticate, ADH */
281 #define SSL_aKRB5               0x00002000L /* Authenticate with KRB5 */
282 #define SSL_aECDSA              0x00004000L /* Authenticate with ECDSA */
283
284 #define SSL_NULL                (SSL_eNULL)
285 #define SSL_ADH                 (SSL_kEDH|SSL_aNULL)
286 #define SSL_RSA                 (SSL_kRSA|SSL_aRSA)
287 #define SSL_DH                  (SSL_kDHr|SSL_kDHd|SSL_kEDH)
288 #define SSL_ECDH                (SSL_kECDH|SSL_kECDHE)
289 #define SSL_FZA                 (SSL_aFZA|SSL_kFZA|SSL_eFZA)
290 #define SSL_KRB5                (SSL_kKRB5|SSL_aKRB5)
291
292 #define SSL_ENC_MASK            0x1C3F8000L
293 #define SSL_DES                 0x00008000L
294 #define SSL_3DES                0x00010000L
295 #define SSL_RC4                 0x00020000L
296 #define SSL_RC2                 0x00040000L
297 #define SSL_IDEA                0x00080000L
298 #define SSL_eFZA                0x00100000L
299 #define SSL_eNULL               0x00200000L
300 #define SSL_AES                 0x04000000L
301 #define SSL_CAMELLIA            0x08000000L
302 #define SSL_SEED                0x10000000L
303
304 #define SSL_MAC_MASK            0x00c00000L
305 #define SSL_MD5                 0x00400000L
306 #define SSL_SHA1                0x00800000L
307 #define SSL_SHA                 (SSL_SHA1)
308
309 #define SSL_SSL_MASK            0x03000000L
310 #define SSL_SSLV2               0x01000000L
311 #define SSL_SSLV3               0x02000000L
312 #define SSL_TLSV1               SSL_SSLV3       /* for now */
313
314 /* we have used 1fffffff - 3 bits left to go. */
315
316 /*
317  * Export and cipher strength information. For each cipher we have to decide
318  * whether it is exportable or not. This information is likely to change
319  * over time, since the export control rules are no static technical issue.
320  *
321  * Independent of the export flag the cipher strength is sorted into classes.
322  * SSL_EXP40 was denoting the 40bit US export limit of past times, which now
323  * is at 56bit (SSL_EXP56). If the exportable cipher class is going to change
324  * again (eg. to 64bit) the use of "SSL_EXP*" becomes blurred even more,
325  * since SSL_EXP64 could be similar to SSL_LOW.
326  * For this reason SSL_MICRO and SSL_MINI macros are included to widen the
327  * namespace of SSL_LOW-SSL_HIGH to lower values. As development of speed
328  * and ciphers goes, another extension to SSL_SUPER and/or SSL_ULTRA would
329  * be possible.
330  */
331 #define SSL_EXP_MASK            0x00000003L
332 #define SSL_NOT_EXP             0x00000001L
333 #define SSL_EXPORT              0x00000002L
334
335 #define SSL_STRONG_MASK         0x000000fcL
336 #define SSL_STRONG_NONE         0x00000004L
337 #define SSL_EXP40               0x00000008L
338 #define SSL_MICRO               (SSL_EXP40)
339 #define SSL_EXP56               0x00000010L
340 #define SSL_MINI                (SSL_EXP56)
341 #define SSL_LOW                 0x00000020L
342 #define SSL_MEDIUM              0x00000040L
343 #define SSL_HIGH                0x00000080L
344 #define SSL_FIPS                0x00000100L
345
346 /* we have used 000001ff - 23 bits left to go */
347
348 /*
349  * Macros to check the export status and cipher strength for export ciphers.
350  * Even though the macros for EXPORT and EXPORT40/56 have similar names,
351  * their meaning is different:
352  * *_EXPORT macros check the 'exportable' status.
353  * *_EXPORT40/56 macros are used to check whether a certain cipher strength
354  *          is given.
355  * Since the SSL_IS_EXPORT* and SSL_EXPORT* macros depend on the correct
356  * algorithm structure element to be passed (algorithms, algo_strength) and no
357  * typechecking can be done as they are all of type unsigned long, their
358  * direct usage is discouraged.
359  * Use the SSL_C_* macros instead.
360  */
361 #define SSL_IS_EXPORT(a)        ((a)&SSL_EXPORT)
362 #define SSL_IS_EXPORT56(a)      ((a)&SSL_EXP56)
363 #define SSL_IS_EXPORT40(a)      ((a)&SSL_EXP40)
364 #define SSL_C_IS_EXPORT(c)      SSL_IS_EXPORT((c)->algo_strength)
365 #define SSL_C_IS_EXPORT56(c)    SSL_IS_EXPORT56((c)->algo_strength)
366 #define SSL_C_IS_EXPORT40(c)    SSL_IS_EXPORT40((c)->algo_strength)
367
368 #define SSL_EXPORT_KEYLENGTH(a,s)       (SSL_IS_EXPORT40(s) ? 5 : \
369                                  ((a)&SSL_ENC_MASK) == SSL_DES ? 8 : 7)
370 #define SSL_EXPORT_PKEYLENGTH(a) (SSL_IS_EXPORT40(a) ? 512 : 1024)
371 #define SSL_C_EXPORT_KEYLENGTH(c)       SSL_EXPORT_KEYLENGTH((c)->algorithms, \
372                                 (c)->algo_strength)
373 #define SSL_C_EXPORT_PKEYLENGTH(c)      SSL_EXPORT_PKEYLENGTH((c)->algo_strength)
374
375
376 #define SSL_ALL                 0xffffffffL
377 #define SSL_ALL_CIPHERS         (SSL_MKEY_MASK|SSL_AUTH_MASK|SSL_ENC_MASK|\
378                                 SSL_MAC_MASK)
379 #define SSL_ALL_STRENGTHS       (SSL_EXP_MASK|SSL_STRONG_MASK)
380
381 /* Mostly for SSLv3 */
382 #define SSL_PKEY_RSA_ENC        0
383 #define SSL_PKEY_RSA_SIGN       1
384 #define SSL_PKEY_DSA_SIGN       2
385 #define SSL_PKEY_DH_RSA         3
386 #define SSL_PKEY_DH_DSA         4
387 #define SSL_PKEY_ECC            5
388 #define SSL_PKEY_NUM            6
389
390 /* SSL_kRSA <- RSA_ENC | (RSA_TMP & RSA_SIGN) |
391  *          <- (EXPORT & (RSA_ENC | RSA_TMP) & RSA_SIGN)
392  * SSL_kDH  <- DH_ENC & (RSA_ENC | RSA_SIGN | DSA_SIGN)
393  * SSL_kEDH <- RSA_ENC | RSA_SIGN | DSA_SIGN
394  * SSL_aRSA <- RSA_ENC | RSA_SIGN
395  * SSL_aDSS <- DSA_SIGN
396  */
397
398 /*
399 #define CERT_INVALID            0
400 #define CERT_PUBLIC_KEY         1
401 #define CERT_PRIVATE_KEY        2
402 */
403
404 #ifndef OPENSSL_NO_EC
405 /* From ECC-TLS draft, used in encoding the curve type in 
406  * ECParameters
407  */
408 #define EXPLICIT_PRIME_CURVE_TYPE  1   
409 #define EXPLICIT_CHAR2_CURVE_TYPE  2
410 #define NAMED_CURVE_TYPE           3
411 #endif  /* OPENSSL_NO_EC */
412
413 typedef struct cert_pkey_st
414         {
415         X509 *x509;
416         EVP_PKEY *privatekey;
417         } CERT_PKEY;
418
419 typedef struct cert_st
420         {
421         /* Current active set */
422         CERT_PKEY *key; /* ALWAYS points to an element of the pkeys array
423                          * Probably it would make more sense to store
424                          * an index, not a pointer. */
425  
426         /* The following masks are for the key and auth
427          * algorithms that are supported by the certs below */
428         int valid;
429         unsigned long mask;
430         unsigned long export_mask;
431 #ifndef OPENSSL_NO_RSA
432         RSA *rsa_tmp;
433         RSA *(*rsa_tmp_cb)(SSL *ssl,int is_export,int keysize);
434 #endif
435 #ifndef OPENSSL_NO_DH
436         DH *dh_tmp;
437         DH *(*dh_tmp_cb)(SSL *ssl,int is_export,int keysize);
438 #endif
439 #ifndef OPENSSL_NO_ECDH
440         EC_KEY *ecdh_tmp;
441         /* Callback for generating ephemeral ECDH keys */
442         EC_KEY *(*ecdh_tmp_cb)(SSL *ssl,int is_export,int keysize);
443 #endif
444
445         CERT_PKEY pkeys[SSL_PKEY_NUM];
446
447         int references; /* >1 only if SSL_copy_session_id is used */
448         } CERT;
449
450
451 typedef struct sess_cert_st
452         {
453         STACK_OF(X509) *cert_chain; /* as received from peer (not for SSL2) */
454
455         /* The 'peer_...' members are used only by clients. */
456         int peer_cert_type;
457
458         CERT_PKEY *peer_key; /* points to an element of peer_pkeys (never NULL!) */
459         CERT_PKEY peer_pkeys[SSL_PKEY_NUM];
460         /* Obviously we don't have the private keys of these,
461          * so maybe we shouldn't even use the CERT_PKEY type here. */
462
463 #ifndef OPENSSL_NO_RSA
464         RSA *peer_rsa_tmp; /* not used for SSL 2 */
465 #endif
466 #ifndef OPENSSL_NO_DH
467         DH *peer_dh_tmp; /* not used for SSL 2 */
468 #endif
469 #ifndef OPENSSL_NO_ECDH
470         EC_KEY *peer_ecdh_tmp;
471 #endif
472
473         int references; /* actually always 1 at the moment */
474         } SESS_CERT;
475
476
477 /*#define MAC_DEBUG     */
478
479 /*#define ERR_DEBUG     */
480 /*#define ABORT_DEBUG   */
481 /*#define PKT_DEBUG 1   */
482 /*#define DES_DEBUG     */
483 /*#define DES_OFB_DEBUG */
484 /*#define SSL_DEBUG     */
485 /*#define RSA_DEBUG     */ 
486 /*#define IDEA_DEBUG    */ 
487
488 #define FP_ICC  (int (*)(const void *,const void *))
489 #define ssl_put_cipher_by_char(ssl,ciph,ptr) \
490                 ((ssl)->method->put_cipher_by_char((ciph),(ptr)))
491 #define ssl_get_cipher_by_char(ssl,ptr) \
492                 ((ssl)->method->get_cipher_by_char(ptr))
493
494 /* This is for the SSLv3/TLSv1.0 differences in crypto/hash stuff
495  * It is a bit of a mess of functions, but hell, think of it as
496  * an opaque structure :-) */
497 typedef struct ssl3_enc_method
498         {
499         int (*enc)(SSL *, int);
500         int (*mac)(SSL *, unsigned char *, int);
501         int (*setup_key_block)(SSL *);
502         int (*generate_master_secret)(SSL *, unsigned char *, unsigned char *, int);
503         int (*change_cipher_state)(SSL *, int);
504         int (*final_finish_mac)(SSL *, EVP_MD_CTX *, EVP_MD_CTX *, const char *, int, unsigned char *);
505         int finish_mac_length;
506         int (*cert_verify_mac)(SSL *, EVP_MD_CTX *, unsigned char *);
507         const char *client_finished_label;
508         int client_finished_label_len;
509         const char *server_finished_label;
510         int server_finished_label_len;
511         int (*alert_value)(int);
512         } SSL3_ENC_METHOD;
513
514 #ifndef OPENSSL_NO_COMP
515 /* Used for holding the relevant compression methods loaded into SSL_CTX */
516 typedef struct ssl3_comp_st
517         {
518         int comp_id;    /* The identifier byte for this compression type */
519         char *name;     /* Text name used for the compression type */
520         COMP_METHOD *method; /* The method :-) */
521         } SSL3_COMP;
522 #endif
523
524 extern SSL3_ENC_METHOD ssl3_undef_enc_method;
525 OPENSSL_EXTERN SSL_CIPHER ssl2_ciphers[];
526 OPENSSL_EXTERN SSL_CIPHER ssl3_ciphers[];
527
528
529 SSL_METHOD *ssl_bad_method(int ver);
530 SSL_METHOD *sslv2_base_method(void);
531 SSL_METHOD *sslv23_base_method(void);
532 SSL_METHOD *sslv3_base_method(void);
533
534 extern SSL3_ENC_METHOD TLSv1_enc_data;
535 extern SSL3_ENC_METHOD SSLv3_enc_data;
536 extern SSL3_ENC_METHOD DTLSv1_enc_data;
537
538 #define IMPLEMENT_tls1_meth_func(func_name, s_accept, s_connect, s_get_meth) \
539 SSL_METHOD *func_name(void)  \
540         { \
541         static SSL_METHOD func_name##_data= { \
542                 TLS1_VERSION, \
543                 tls1_new, \
544                 tls1_clear, \
545                 tls1_free, \
546                 s_accept, \
547                 s_connect, \
548                 ssl3_read, \
549                 ssl3_peek, \
550                 ssl3_write, \
551                 ssl3_shutdown, \
552                 ssl3_renegotiate, \
553                 ssl3_renegotiate_check, \
554                 ssl3_get_message, \
555                 ssl3_read_bytes, \
556                 ssl3_write_bytes, \
557                 ssl3_dispatch_alert, \
558                 ssl3_ctrl, \
559                 ssl3_ctx_ctrl, \
560                 ssl3_get_cipher_by_char, \
561                 ssl3_put_cipher_by_char, \
562                 ssl3_pending, \
563                 ssl3_num_ciphers, \
564                 ssl3_get_cipher, \
565                 s_get_meth, \
566                 tls1_default_timeout, \
567                 &TLSv1_enc_data, \
568                 ssl_undefined_void_function, \
569                 ssl3_callback_ctrl, \
570                 ssl3_ctx_callback_ctrl, \
571         }; \
572         return &func_name##_data; \
573         }
574
575 #define IMPLEMENT_ssl3_meth_func(func_name, s_accept, s_connect, s_get_meth) \
576 SSL_METHOD *func_name(void)  \
577         { \
578         static SSL_METHOD func_name##_data= { \
579                 SSL3_VERSION, \
580                 ssl3_new, \
581                 ssl3_clear, \
582                 ssl3_free, \
583                 s_accept, \
584                 s_connect, \
585                 ssl3_read, \
586                 ssl3_peek, \
587                 ssl3_write, \
588                 ssl3_shutdown, \
589                 ssl3_renegotiate, \
590                 ssl3_renegotiate_check, \
591                 ssl3_get_message, \
592                 ssl3_read_bytes, \
593                 ssl3_write_bytes, \
594                 ssl3_dispatch_alert, \
595                 ssl3_ctrl, \
596                 ssl3_ctx_ctrl, \
597                 ssl3_get_cipher_by_char, \
598                 ssl3_put_cipher_by_char, \
599                 ssl3_pending, \
600                 ssl3_num_ciphers, \
601                 ssl3_get_cipher, \
602                 s_get_meth, \
603                 ssl3_default_timeout, \
604                 &SSLv3_enc_data, \
605                 ssl_undefined_void_function, \
606                 ssl3_callback_ctrl, \
607                 ssl3_ctx_callback_ctrl, \
608         }; \
609         return &func_name##_data; \
610         }
611
612 #define IMPLEMENT_ssl23_meth_func(func_name, s_accept, s_connect, s_get_meth) \
613 SSL_METHOD *func_name(void)  \
614         { \
615         static SSL_METHOD func_name##_data= { \
616         TLS1_VERSION, \
617         tls1_new, \
618         tls1_clear, \
619         tls1_free, \
620         s_accept, \
621         s_connect, \
622         ssl23_read, \
623         ssl23_peek, \
624         ssl23_write, \
625         ssl_undefined_function, \
626         ssl_undefined_function, \
627         ssl_ok, \
628         ssl3_get_message, \
629         ssl3_read_bytes, \
630         ssl3_write_bytes, \
631         ssl3_dispatch_alert, \
632         ssl3_ctrl, \
633         ssl3_ctx_ctrl, \
634         ssl23_get_cipher_by_char, \
635         ssl23_put_cipher_by_char, \
636         ssl_undefined_const_function, \
637         ssl23_num_ciphers, \
638         ssl23_get_cipher, \
639         s_get_meth, \
640         ssl23_default_timeout, \
641         &ssl3_undef_enc_method, \
642         ssl_undefined_void_function, \
643         ssl3_callback_ctrl, \
644         ssl3_ctx_callback_ctrl, \
645         }; \
646         return &func_name##_data; \
647         }
648
649 #define IMPLEMENT_ssl2_meth_func(func_name, s_accept, s_connect, s_get_meth) \
650 SSL_METHOD *func_name(void)  \
651         { \
652         static SSL_METHOD func_name##_data= { \
653                 SSL2_VERSION, \
654                 ssl2_new,       /* local */ \
655                 ssl2_clear,     /* local */ \
656                 ssl2_free,      /* local */ \
657                 s_accept, \
658                 s_connect, \
659                 ssl2_read, \
660                 ssl2_peek, \
661                 ssl2_write, \
662                 ssl2_shutdown, \
663                 ssl_ok, /* NULL - renegotiate */ \
664                 ssl_ok, /* NULL - check renegotiate */ \
665                 NULL, /* NULL - ssl_get_message */ \
666                 NULL, /* NULL - ssl_get_record */ \
667                 NULL, /* NULL - ssl_write_bytes */ \
668                 NULL, /* NULL - dispatch_alert */ \
669                 ssl2_ctrl,      /* local */ \
670                 ssl2_ctx_ctrl,  /* local */ \
671                 ssl2_get_cipher_by_char, \
672                 ssl2_put_cipher_by_char, \
673                 ssl2_pending, \
674                 ssl2_num_ciphers, \
675                 ssl2_get_cipher, \
676                 s_get_meth, \
677                 ssl2_default_timeout, \
678                 &ssl3_undef_enc_method, \
679                 ssl_undefined_void_function, \
680                 ssl2_callback_ctrl,     /* local */ \
681                 ssl2_ctx_callback_ctrl, /* local */ \
682         }; \
683         return &func_name##_data; \
684         }
685
686 #define IMPLEMENT_dtls1_meth_func(func_name, s_accept, s_connect, s_get_meth) \
687 SSL_METHOD *func_name(void)  \
688         { \
689         static SSL_METHOD func_name##_data= { \
690                 DTLS1_VERSION, \
691                 dtls1_new, \
692                 dtls1_clear, \
693                 dtls1_free, \
694                 s_accept, \
695                 s_connect, \
696                 ssl3_read, \
697                 ssl3_peek, \
698                 ssl3_write, \
699                 ssl3_shutdown, \
700                 ssl3_renegotiate, \
701                 ssl3_renegotiate_check, \
702                 dtls1_get_message, \
703                 dtls1_read_bytes, \
704                 dtls1_write_app_data_bytes, \
705                 dtls1_dispatch_alert, \
706                 dtls1_ctrl, \
707                 ssl3_ctx_ctrl, \
708                 ssl3_get_cipher_by_char, \
709                 ssl3_put_cipher_by_char, \
710                 ssl3_pending, \
711                 ssl3_num_ciphers, \
712                 dtls1_get_cipher, \
713                 s_get_meth, \
714                 dtls1_default_timeout, \
715                 &DTLSv1_enc_data, \
716                 ssl_undefined_void_function, \
717                 ssl3_callback_ctrl, \
718                 ssl3_ctx_callback_ctrl, \
719         }; \
720         return &func_name##_data; \
721         }
722
723 void ssl_clear_cipher_ctx(SSL *s);
724 int ssl_clear_bad_session(SSL *s);
725 CERT *ssl_cert_new(void);
726 CERT *ssl_cert_dup(CERT *cert);
727 int ssl_cert_inst(CERT **o);
728 void ssl_cert_free(CERT *c);
729 SESS_CERT *ssl_sess_cert_new(void);
730 void ssl_sess_cert_free(SESS_CERT *sc);
731 int ssl_set_peer_cert_type(SESS_CERT *c, int type);
732 int ssl_get_new_session(SSL *s, int session);
733 int ssl_get_prev_session(SSL *s, unsigned char *session,int len, const unsigned char *limit);
734 int ssl_cipher_id_cmp(const SSL_CIPHER *a,const SSL_CIPHER *b);
735 int ssl_cipher_ptr_id_cmp(const SSL_CIPHER * const *ap,
736                         const SSL_CIPHER * const *bp);
737 STACK_OF(SSL_CIPHER) *ssl_bytes_to_cipher_list(SSL *s,unsigned char *p,int num,
738                                                STACK_OF(SSL_CIPHER) **skp);
739 int ssl_cipher_list_to_bytes(SSL *s,STACK_OF(SSL_CIPHER) *sk,unsigned char *p,
740                              int (*put_cb)(const SSL_CIPHER *, unsigned char *));
741 STACK_OF(SSL_CIPHER) *ssl_create_cipher_list(const SSL_METHOD *meth,
742                                              STACK_OF(SSL_CIPHER) **pref,
743                                              STACK_OF(SSL_CIPHER) **sorted,
744                                              const char *rule_str);
745 void ssl_update_cache(SSL *s, int mode);
746 int ssl_cipher_get_evp(const SSL_SESSION *s,const EVP_CIPHER **enc,
747                        const EVP_MD **md,SSL_COMP **comp);
748 int ssl_verify_cert_chain(SSL *s,STACK_OF(X509) *sk);
749 int ssl_undefined_function(SSL *s);
750 int ssl_undefined_void_function(void);
751 int ssl_undefined_const_function(const SSL *s);
752 CERT_PKEY *ssl_get_server_send_pkey(const SSL *s);
753 X509 *ssl_get_server_send_cert(const SSL *);
754 EVP_PKEY *ssl_get_sign_pkey(SSL *,SSL_CIPHER *);
755 int ssl_cert_type(X509 *x,EVP_PKEY *pkey);
756 void ssl_set_cert_masks(CERT *c, SSL_CIPHER *cipher);
757 STACK_OF(SSL_CIPHER) *ssl_get_ciphers_by_id(SSL *s);
758 int ssl_verify_alarm_type(long type);
759 void ssl_load_ciphers(void);
760
761 int ssl2_enc_init(SSL *s, int client);
762 int ssl2_generate_key_material(SSL *s);
763 void ssl2_enc(SSL *s,int send_data);
764 void ssl2_mac(SSL *s,unsigned char *mac,int send_data);
765 SSL_CIPHER *ssl2_get_cipher_by_char(const unsigned char *p);
766 int ssl2_put_cipher_by_char(const SSL_CIPHER *c,unsigned char *p);
767 int ssl2_part_read(SSL *s, unsigned long f, int i);
768 int ssl2_do_write(SSL *s);
769 int ssl2_set_certificate(SSL *s, int type, int len, const unsigned char *data);
770 void ssl2_return_error(SSL *s,int reason);
771 void ssl2_write_error(SSL *s);
772 int ssl2_num_ciphers(void);
773 SSL_CIPHER *ssl2_get_cipher(unsigned int u);
774 int     ssl2_new(SSL *s);
775 void    ssl2_free(SSL *s);
776 int     ssl2_accept(SSL *s);
777 int     ssl2_connect(SSL *s);
778 int     ssl2_read(SSL *s, void *buf, int len);
779 int     ssl2_peek(SSL *s, void *buf, int len);
780 int     ssl2_write(SSL *s, const void *buf, int len);
781 int     ssl2_shutdown(SSL *s);
782 void    ssl2_clear(SSL *s);
783 long    ssl2_ctrl(SSL *s,int cmd, long larg, void *parg);
784 long    ssl2_ctx_ctrl(SSL_CTX *s,int cmd, long larg, void *parg);
785 long    ssl2_callback_ctrl(SSL *s,int cmd, void (*fp)(void));
786 long    ssl2_ctx_callback_ctrl(SSL_CTX *s,int cmd, void (*fp)(void));
787 int     ssl2_pending(const SSL *s);
788 long    ssl2_default_timeout(void );
789
790 SSL_CIPHER *ssl3_get_cipher_by_char(const unsigned char *p);
791 int ssl3_put_cipher_by_char(const SSL_CIPHER *c,unsigned char *p);
792 void ssl3_init_finished_mac(SSL *s);
793 int ssl3_send_server_certificate(SSL *s);
794 int ssl3_send_newsession_ticket(SSL *s);
795 int ssl3_send_cert_status(SSL *s);
796 int ssl3_get_finished(SSL *s,int state_a,int state_b);
797 int ssl3_setup_key_block(SSL *s);
798 int ssl3_send_change_cipher_spec(SSL *s,int state_a,int state_b);
799 int ssl3_change_cipher_state(SSL *s,int which);
800 void ssl3_cleanup_key_block(SSL *s);
801 int ssl3_do_write(SSL *s,int type);
802 int ssl3_send_alert(SSL *s,int level, int desc);
803 int ssl3_generate_master_secret(SSL *s, unsigned char *out,
804         unsigned char *p, int len);
805 int ssl3_get_req_cert_type(SSL *s,unsigned char *p);
806 long ssl3_get_message(SSL *s, int st1, int stn, int mt, long max, int *ok);
807 int ssl3_send_finished(SSL *s, int a, int b, const char *sender,int slen);
808 int ssl3_num_ciphers(void);
809 SSL_CIPHER *ssl3_get_cipher(unsigned int u);
810 int ssl3_renegotiate(SSL *ssl); 
811 int ssl3_renegotiate_check(SSL *ssl); 
812 int ssl3_dispatch_alert(SSL *s);
813 int ssl3_read_bytes(SSL *s, int type, unsigned char *buf, int len, int peek);
814 int ssl3_write_bytes(SSL *s, int type, const void *buf, int len);
815 int ssl3_final_finish_mac(SSL *s, EVP_MD_CTX *ctx1, EVP_MD_CTX *ctx2,
816         const char *sender, int slen,unsigned char *p);
817 int ssl3_cert_verify_mac(SSL *s, EVP_MD_CTX *in, unsigned char *p);
818 void ssl3_finish_mac(SSL *s, const unsigned char *buf, int len);
819 int ssl3_enc(SSL *s, int send_data);
820 int ssl3_mac(SSL *ssl, unsigned char *md, int send_data);
821 unsigned long ssl3_output_cert_chain(SSL *s, X509 *x);
822 SSL_CIPHER *ssl3_choose_cipher(SSL *ssl,STACK_OF(SSL_CIPHER) *clnt,
823                                STACK_OF(SSL_CIPHER) *srvr);
824 int     ssl3_setup_buffers(SSL *s);
825 int     ssl3_new(SSL *s);
826 void    ssl3_free(SSL *s);
827 int     ssl3_accept(SSL *s);
828 int     ssl3_connect(SSL *s);
829 int     ssl3_read(SSL *s, void *buf, int len);
830 int     ssl3_peek(SSL *s, void *buf, int len);
831 int     ssl3_write(SSL *s, const void *buf, int len);
832 int     ssl3_shutdown(SSL *s);
833 void    ssl3_clear(SSL *s);
834 long    ssl3_ctrl(SSL *s,int cmd, long larg, void *parg);
835 long    ssl3_ctx_ctrl(SSL_CTX *s,int cmd, long larg, void *parg);
836 long    ssl3_callback_ctrl(SSL *s,int cmd, void (*fp)(void));
837 long    ssl3_ctx_callback_ctrl(SSL_CTX *s,int cmd, void (*fp)(void));
838 int     ssl3_pending(const SSL *s);
839
840 void ssl3_record_sequence_update(unsigned char *seq);
841 int ssl3_do_change_cipher_spec(SSL *ssl);
842 long ssl3_default_timeout(void );
843
844 int ssl23_num_ciphers(void );
845 SSL_CIPHER *ssl23_get_cipher(unsigned int u);
846 int ssl23_read(SSL *s, void *buf, int len);
847 int ssl23_peek(SSL *s, void *buf, int len);
848 int ssl23_write(SSL *s, const void *buf, int len);
849 int ssl23_put_cipher_by_char(const SSL_CIPHER *c, unsigned char *p);
850 SSL_CIPHER *ssl23_get_cipher_by_char(const unsigned char *p);
851 long ssl23_default_timeout(void );
852
853 long tls1_default_timeout(void);
854 int dtls1_do_write(SSL *s,int type);
855 int ssl3_read_n(SSL *s, int n, int max, int extend);
856 int dtls1_read_bytes(SSL *s, int type, unsigned char *buf, int len, int peek);
857 int ssl3_do_compress(SSL *ssl);
858 int ssl3_do_uncompress(SSL *ssl);
859 int ssl3_write_pending(SSL *s, int type, const unsigned char *buf,
860         unsigned int len);
861 unsigned char *dtls1_set_message_header(SSL *s, 
862         unsigned char *p, unsigned char mt,     unsigned long len, 
863         unsigned long frag_off, unsigned long frag_len);
864
865 int dtls1_write_app_data_bytes(SSL *s, int type, const void *buf, int len);
866 int dtls1_write_bytes(SSL *s, int type, const void *buf, int len);
867
868 int dtls1_send_change_cipher_spec(SSL *s, int a, int b);
869 int dtls1_send_finished(SSL *s, int a, int b, const char *sender, int slen);
870 unsigned long dtls1_output_cert_chain(SSL *s, X509 *x);
871 int dtls1_read_failed(SSL *s, int code);
872 int dtls1_buffer_message(SSL *s, int ccs);
873 int dtls1_retransmit_message(SSL *s, unsigned short seq, 
874         unsigned long frag_off, int *found);
875 int dtls1_get_queue_priority(unsigned short seq, int is_ccs);
876 int dtls1_retransmit_buffered_messages(SSL *s);
877 void dtls1_clear_record_buffer(SSL *s);
878 void dtls1_get_message_header(unsigned char *data, struct hm_header_st *msg_hdr);
879 void dtls1_get_ccs_header(unsigned char *data, struct ccs_header_st *ccs_hdr);
880 void dtls1_reset_seq_numbers(SSL *s, int rw);
881 long dtls1_default_timeout(void);
882 struct timeval* dtls1_get_timeout(SSL *s, struct timeval* timeleft);
883 int dtls1_check_timeout_num(SSL *s);
884 int dtls1_handle_timeout(SSL *s);
885 SSL_CIPHER *dtls1_get_cipher(unsigned int u);
886 void dtls1_start_timer(SSL *s);
887 void dtls1_stop_timer(SSL *s);
888 int dtls1_is_timer_expired(SSL *s);
889 void dtls1_double_timeout(SSL *s);
890 int dtls1_send_newsession_ticket(SSL *s);
891 unsigned int dtls1_min_mtu(void);
892
893
894 /* some client-only functions */
895 int ssl3_client_hello(SSL *s);
896 int ssl3_get_server_hello(SSL *s);
897 int ssl3_get_certificate_request(SSL *s);
898 int ssl3_get_new_session_ticket(SSL *s);
899 int ssl3_get_cert_status(SSL *s);
900 int ssl3_get_server_done(SSL *s);
901 int ssl3_send_client_verify(SSL *s);
902 int ssl_do_client_cert_cb(SSL *s, X509 **px509, EVP_PKEY **ppkey);
903 int ssl3_send_client_certificate(SSL *s);
904 int ssl3_send_client_key_exchange(SSL *s);
905 int ssl3_get_key_exchange(SSL *s);
906 int ssl3_get_server_certificate(SSL *s);
907 int ssl3_check_cert_and_algorithm(SSL *s);
908 #ifndef OPENSSL_NO_TLSEXT
909 int ssl3_check_finished(SSL *s);
910 #endif
911
912 int dtls1_client_hello(SSL *s);
913 int dtls1_send_client_certificate(SSL *s);
914 int dtls1_send_client_key_exchange(SSL *s);
915 int dtls1_send_client_verify(SSL *s);
916
917 /* some server-only functions */
918 int ssl3_get_client_hello(SSL *s);
919 int ssl3_send_server_hello(SSL *s);
920 int ssl3_send_hello_request(SSL *s);
921 int ssl3_send_server_key_exchange(SSL *s);
922 int ssl3_send_certificate_request(SSL *s);
923 int ssl3_send_server_done(SSL *s);
924 int ssl3_check_client_hello(SSL *s);
925 int ssl3_get_client_certificate(SSL *s);
926 int ssl3_get_client_key_exchange(SSL *s);
927 int ssl3_get_cert_verify(SSL *s);
928
929 int dtls1_send_hello_request(SSL *s);
930 int dtls1_send_server_hello(SSL *s);
931 int dtls1_send_server_certificate(SSL *s);
932 int dtls1_send_server_key_exchange(SSL *s);
933 int dtls1_send_certificate_request(SSL *s);
934 int dtls1_send_server_done(SSL *s);
935
936
937
938 int ssl23_accept(SSL *s);
939 int ssl23_connect(SSL *s);
940 int ssl23_read_bytes(SSL *s, int n);
941 int ssl23_write_bytes(SSL *s);
942
943 int tls1_new(SSL *s);
944 void tls1_free(SSL *s);
945 void tls1_clear(SSL *s);
946 long tls1_ctrl(SSL *s,int cmd, long larg, void *parg);
947 long tls1_callback_ctrl(SSL *s,int cmd, void (*fp)(void));
948 SSL_METHOD *tlsv1_base_method(void );
949
950 int dtls1_new(SSL *s);
951 int     dtls1_accept(SSL *s);
952 int     dtls1_connect(SSL *s);
953 void dtls1_free(SSL *s);
954 void dtls1_clear(SSL *s);
955 long dtls1_ctrl(SSL *s,int cmd, long larg, void *parg);
956 SSL_METHOD *dtlsv1_base_method(void );
957
958 long dtls1_get_message(SSL *s, int st1, int stn, int mt, long max, int *ok);
959 int dtls1_get_record(SSL *s);
960 int do_dtls1_write(SSL *s, int type, const unsigned char *buf,
961         unsigned int len, int create_empty_fragement);
962 int dtls1_dispatch_alert(SSL *s);
963 int dtls1_enc(SSL *s, int snd);
964
965 int ssl_init_wbio_buffer(SSL *s, int push);
966 void ssl_free_wbio_buffer(SSL *s);
967
968 int tls1_change_cipher_state(SSL *s, int which);
969 int tls1_setup_key_block(SSL *s);
970 int tls1_enc(SSL *s, int snd);
971 int tls1_final_finish_mac(SSL *s, EVP_MD_CTX *in1_ctx, EVP_MD_CTX *in2_ctx,
972         const char *str, int slen, unsigned char *p);
973 int tls1_cert_verify_mac(SSL *s, EVP_MD_CTX *in, unsigned char *p);
974 int tls1_mac(SSL *ssl, unsigned char *md, int snd);
975 int tls1_generate_master_secret(SSL *s, unsigned char *out,
976         unsigned char *p, int len);
977 int tls1_alert_code(int code);
978 int ssl3_alert_code(int code);
979 int ssl_ok(SSL *s);
980
981 int check_srvr_ecc_cert_and_alg(X509 *x, SSL_CIPHER *cs);
982
983 SSL_COMP *ssl3_comp_find(STACK_OF(SSL_COMP) *sk, int n);
984
985 #ifndef OPENSSL_NO_TLSEXT
986 unsigned char *ssl_add_clienthello_tlsext(SSL *s, unsigned char *p, unsigned char *limit); 
987 unsigned char *ssl_add_serverhello_tlsext(SSL *s, unsigned char *p, unsigned char *limit); 
988 int ssl_parse_clienthello_tlsext(SSL *s, unsigned char **data, unsigned char *d, int n, int *al);
989 int ssl_parse_serverhello_tlsext(SSL *s, unsigned char **data, unsigned char *d, int n, int *al);
990 int ssl_prepare_clienthello_tlsext(SSL *s);
991 int ssl_prepare_serverhello_tlsext(SSL *s);
992 int ssl_check_clienthello_tlsext_early(SSL *s);
993 int ssl_check_clienthello_tlsext_late(SSL *s);
994 int ssl_check_serverhello_tlsext(SSL *s);
995
996 #ifdef OPENSSL_NO_SHA256
997 #define tlsext_tick_md  EVP_sha1
998 #else
999 #define tlsext_tick_md  EVP_sha256
1000 #endif
1001 int tls1_process_ticket(SSL *s, unsigned char *session_id, int len,
1002                                 const unsigned char *limit, SSL_SESSION **ret);
1003 EVP_MD_CTX* ssl_replace_hash(EVP_MD_CTX **hash,const EVP_MD *md) ;
1004 void ssl_clear_hash_ctx(EVP_MD_CTX **hash);
1005
1006 int ssl_add_serverhello_renegotiate_ext(SSL *s, unsigned char *p, int *len,
1007                                         int maxlen);
1008 int ssl_parse_serverhello_renegotiate_ext(SSL *s, unsigned char *d, int len,
1009                                           int *al);
1010 int ssl_add_clienthello_renegotiate_ext(SSL *s, unsigned char *p, int *len,
1011                                         int maxlen);
1012 int ssl_parse_clienthello_renegotiate_ext(SSL *s, unsigned char *d, int len,
1013                                           int *al);
1014 #endif
1015 /* s3_cbc.c */
1016 void ssl3_cbc_copy_mac(unsigned char* out,
1017                        const SSL3_RECORD *rec,
1018                        unsigned md_size);
1019 int ssl3_cbc_remove_padding(const SSL* s,
1020                             SSL3_RECORD *rec,
1021                             unsigned block_size,
1022                             unsigned mac_size);
1023 int tls1_cbc_remove_padding(const SSL* s,
1024                             SSL3_RECORD *rec,
1025                             unsigned block_size,
1026                             unsigned mac_size);
1027 char ssl3_cbc_record_digest_supported(const EVP_MD *hash);
1028 void ssl3_cbc_digest_record(
1029         const EVP_MD *hash,
1030         unsigned char* md_out,
1031         size_t* md_out_size,
1032         const unsigned char header[13],
1033         const unsigned char *data,
1034         size_t data_plus_mac_size,
1035         size_t data_plus_mac_plus_padding_size,
1036         const unsigned char *mac_secret,
1037         unsigned mac_secret_length,
1038         char is_sslv3);
1039
1040
1041 #endif